Turgo Turbine Generator Unit
Turgo turbine generator unit primarily applies to water head 20-100 m. It is installed easily for use pipe installation. Mainly two types: horizontal and vertical, horizontal has a simple structure, easy maintenance and lower plant height, reducing the advantages of excavation depth. Vertical units with a plant area of small size, multiple nozzles can be installed on a wheel, high speed, same-unit sizes are relatively small, light weight and so on.
Axial Flow Type Turbine Generator Set
Axial flow turbine, mainly used in place with relatively low water head, for example: river, small dam etc.The model mainly including generator and coaxial impeller.
Working principle: Axial flow turbine mainly including the runner body, blade, runner cone composition. Suitable for low water head, large flows. Under the same head, the speed is higher than the Francis turbine. Micro Axial flow Turbine working water head between 1 m to 6 m.
Mixed flow turbine Generator Unit
Mixed flow turbines, water flows from the radial flow around runners, and axial flow runner. Flow turbine structure is compact, efficient, able to adapt to a wide range of broad water, mainly suitable for 10 m-70 m water head. Mixed flow turbine is now widely used around the world.
Impulse Turbine Generator Set
Impulse turbine runner uses the kinetic energy to work, the work of hydraulic turbine runner rely on high-speed water impact, water is from the reservoir and forebay intake steel pipes into the turbine inlet pipe, and then through the nozzle, forming a high speed Jet, shooting to the blades of the wheel circumference, flow of its energy (head) to the wheel, drive wheel spin.